A1 Roofing Manchester

As a homeowner in Manchester, you're likely familiar with the challenges of maintaining a secure and weather-tight roof. One common issue is the verge, the edge of the roof where the tiles meet the gable end. Traditional mortar-based verge systems can be prone to cracking and water ingress, leading to costly repairs. A dry verge system offers a more reliable and low-maintenance solution. In this article, we'll guide you through the process of fitting a dry verge system to an existing roof in Manchester.

Before starting the installation, ensure the roof is clear of debris and the tiles are securely fixed. Remove any existing verge mortar and render, taking care not to damage the surrounding tiles or gable end.

Carefully remove the tiles along the verge, typically the top two or three courses, to access the gable end. Set these tiles aside for re-use later.

Begin by installing the dry verge units along the gable end, ensuring they're securely fixed to the roof's edge. These units are designed to provide a watertight seal and can be adjusted to fit different tile profiles.

Once the dry verge units are in place, re-fit the removed tiles, ensuring they're securely fixed to the units. The tiles should be aligned with the rest of the roof, creating a seamless finish.

Use the manufacturer's recommended fixings to secure the dry verge units to the roof's edge. Make sure the system is tightly sealed to prevent water ingress.

Finally, render the gable end to match the existing finish, ensuring a neat and tidy appearance.

A dry verge system offers several benefits, including:

• Improved weather-tightness and reduced risk of water ingress
• Low maintenance, as there's no mortar to crack or deteriorate
• Easy to install, with minimal disruption to the roof
• Compatible with most tile profiles and roof types